What problems should be paid attention to in the processing of non-standard hardware parts?

In the hardware industry, the processing of non-standard hardware parts we are talking about can actually be said to be customized production of non-standard parts. Non-standard parts have great potential in the market. The demand is getting bigger and bigger with the changes of the market and the development of science and technology. Therefore, our technology is constantly improving in processing. Therefore, in such an environment, manufacturers can only meet the ever-increasing needs of users with good service and innovation capabilities under the premise of ensuring quality, so as to achieve the goal of survival and development. Now let’s understand what problems should be paid attention to when processing and operating machinery for non-standard hardware parts:

1. Before the machine works, check whether the moving part is filled with lubricating oil, then start and check whether the clutch and brake are normal, and run the machine idling for 1-3 minutes. Operation is strictly prohibited when the machine is faulty.
2. Maintain the correct posture when processing non-standard hardware parts, and have sufficient energy to cope with the work. If you find that you are unwell, you should leave the job immediately and report to the leader. When processing non-standard hardware parts, you must concentrate your thoughts, chat, and cooperate with each other. Operators should not operate in a state of irritability and fatigue to avoid accidents and ensure safe operation. Before entering the work position, all employees check whether their clothing meets the job requirements. Slippers, high heels and clothing that affect safety are not allowed, and those with long hair must wear a helmet.
3. Turn off the power first when changing the mold, and then start to install and debug the mold after the press movement department stops running. After installation and adjustment, move the flywheel by hand for two test punches to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the blank holder is in a reasonable position.
Non-standard hardware parts processing
4. After all other personnel have left the working area of ​​the machine and removed the sundries on the workbench, the power supply can be started to start the machine.
5. When the machine is working, it is forbidden to reach into the working area of ​​the slide block, and it is strictly forbidden to pick and place the workpiece by hand. When picking and placing the workpiece in the die, tools that meet the standards must be used. If you find any abnormal sound or malfunction of the machine, you should immediately turn off the power switch for inspection. After the non-standard hardware parts processing machinery is started, one person transports the materials and operates the machine. Others are not allowed to press the electrical construction or the foot switch board, let alone put their hands in the machine working area or touch the moving parts of the machine with their hands.
6. When leaving get off work, turn off the idle power and arrange the finished products, side materials and sundries on the job to ensure a clean and safe working environment.

Leave a Reply

Your email address will not be published. Required fields are marked *